EKSTRA NG 103'' 2.63M KIRMIZI MAVİ BEYAZ
Stok Kodu
:
MU-EXTNG-103-01
Ürününüzün garantisinin devamlılığı için periyodik bakımları yapıldıktan sonra bu formun doldurularak tarafımıza gönderilip online kaydı alınmalıdır.
Liste Fiyatı
Net Alış Fiyatınız
1.455,00 USD + KDVNet Alış Fiyatınız
76.900,65 TL
KDV DAHİL
Ödeme Seçenekleri
+ taksit kampanyasına Ticari Card'lar ve Flexi Card’lar dahil değildir.
76.900,65 TL
KDV DAHİL
Taksit Seçenekleri
Taksit Seçenekleri
Taksit Seçenekleri
Taksit Seçenekleri
Taksit Seçenekleri
Taksit Seçenekleri
Taksit Seçenekleri

FEATURES:NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings, stabilizer and SFG
NEW! Patented quick assembly system for canopy.
Film covering applied over a Genuine German Oracover (Ultracote) base
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
Removable wings and stabs
Laser engraved motor mounting position
Easy canister installation due to open construction
Pull push system for Rudder servo
Included hardware:
Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
“Spare” lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pushrods with ball links
Matching carbon spinner, 4.5″
CRASH KITS AVAILABLE FOR THIS MODEL:
Landing gear repair package. Includes the wooden parts required to repair the damage often suffered around the landing gear area.
Front fuselage repair package. Includes the wooden parts required to repair the damage often suffered around the front of the model
Please note that additional or alternative spare wood outside of the above Packs is not available to order.
Extension wire lengths:
Throttle:
25cm
Each wing:
Inside aileron 30cm
Outside aileron 80cm
(to reach receiver direct)
Each elevator:
136cm
Each rudder servo:
136cm
CENTER OF GRAVITY:
225mm
Measured back from leading edge of the wing at the fuselage.
You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.

Bu ürüne ilk yorumu siz yapın!